Press the return To Point button to store a loca-. A dot will ap-. To locate the point, press the return To Point. To exit return To Point, press the return To Point button again. Use the. Change Page button to switch between the re-.
The arrow points in. A line is drawn between. The vehicle is at the. Position the GPS antenna in the center. If the tractor is. Straight A-B Guidance. Curved A-B Guidance. Decrease Guidance. Distance to point.
TeeJet manuals. CenterLine User Guide. Text mode Original mode 1 2. View the bottom left of the display window to see the Guidance mode selected. All swaths are identical to the path driven on the first pass between Points A and B. As an option, the CL can be connected to any controller or monitor that supports a radar speed input.
For non-metal vehicles, a metal plate with adhesive strips has been included in the kit for easy mounting and installation. Once the antenna has been positioned, route the antenna cable carefully to avoid damage. Press the Power button again to power down the console.
Use the Increase and Decrease buttons to make adjustments. To invert the colors on the display, press and hold the Contrast button for 3 seconds. Use the In- crease and Decrease buttons to make ad- justments to the swath width. The swath width measurement displayed will be used until changed. Point A will be marked. The CL will begin providing guidance with the lightbar and data display. A dot will ap- pear on the bottom of the display, indicating that a position has been stored.
To locate the point, press the return To Point button again and begin navigating toward the point as indicated on the display. The swath width measurement displayed will be used until changed. If the Mark A button was pressed inadvertently and a Point A was created, it can be released by.
View the bottom left of the display window to see the Guidance mode selected. All swaths are identical to the path driven on the first. A Point. At any time after a guideline is created, the guidance line can be shifted to the current vehicle position by pressing the Mark A-B. Press the Return To Point button to store a location in which to return at a later time.
A dot will appear on the bottom of the display, indicating that a position has been stored. To locate the point, press the Return To Point button again and begin navigating toward the point as indicated on the display. To exit Return To Point,. Welcome to ManualMachine. We have sent a verification link to to complete your registration.
Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. CenterLine User Guide. If the tractor is non-metal, mount the metal plate in the center of the vehicle at the highest point with the adhesive strips and place the antenna on the plate.
Route the antenna cable carefully to avoid damage. Antenna Metal plate. Press the Power button again to power down the console. Use the In- crease and Decrease buttons to make adjustments to the swath width. Point A will be marked.
The display will then change to Mark B. Travel to the location for Point B to be marked. The CL will begin providing guidance with the lightbar and data display. All swaths are identical to the path driven on the first pass between Points A and B. The arrow points in the direction of the marked point.
0コメント